3U Panel for Elecraft K3(s) and P3
- Machined 3U - ¼” thick Aluminum Rack Mount Front Panel with handles
- Replacement left and right side panels for the K3(s) and the P3 included
- Included are four side brackets that securely fasten equipment to the front panel
- All sheet metal pieces powder coated same as Elecraft equipment
- Stainless steel hardware for installation to the panel included
- P3 on the left and K3(s) on the right configuration also possible
- Elecraft K3(s) and P3 not included
The rack mount concept for the K3(s)/P3 panel requires that the left and right side panels of the K3(s) and the P3 be replaced. The new K3(s) left and right panels have captive nuts press fitted in the sheet metal. Replacing the right side panel on the K3(s) should be done with care. Please be aware before proceeding further or get assistance from a qualified person to do the work.
Once the side panels are replaced then the panel mount side brackets are installed to the K3(s) and P3 using the flat head screws. Then each of the units are mounted to the machined front panel with the screws provided.
We recommend a Phillips #2 screwdriver 350mm long to facilitate mounting the screws to the front panel. Short length screwdrivers may cause cross threading of the threads in the panel if not done correctly and cause damage.
RETURN & REFUND POLICY
Returns must be authorized with a RMA (Return Merchandise Authorization) number. Please contact us before you send the item back. Shipping charges are the customer's responsibility. Item must be clean and unused. Restocking fees may apply.
Shipping is via UPS Ground and charges will be calculated depending on the destination. We will notify you of the shipping charges before shipping. No shipping to P.O. Boxes. If you would like USPS shipping, please email us the details.