3U Panel for Elecraft KPA1500
- Machined 3U - ¼” thick Aluminum Rack Mount Front Panel with handles
- Replacement right side panel for the KPA1500 included
- Two side brackets securely fasten equipment to the front panel also included
- Stainless steel hardware for installation to the panel included
- Elecraft KPA1500 not included
PRODUCT INFO
The rack mount concept for the KPA1500 amplifier requires that the right side panel be replaced. The new right panel has captive nuts press fitted in the sheet metal. Replacing the right side panel on the KPA1500 should be done with extreme care as incorrect re-assembly may cause damage to the amplifier or the radio.
Once the side panels are replaced, the panel mount side brackets are installed to the KPA1500 using the pan head screws. Then mount the whole unit to the machined front panel with the pan head screws provided.
We recommend a Phillips #2 screwdriver 350mm long to facilitate mounting the screws to the front panel. Short length screwdrivers may cause cross threading of the threads in the panel if not done correctly and cause damage.
RETURN & REFUND POLICY
Returns must be authorized with a RMA (Return Merchandise Authorization) number. Please contact us before you send the item back. Shipping charges are the customer's responsibility. Item must be clean and unused. Restocking fees may apply.
SHIPPING INFO
Shipping is via UPS Ground and charges will be calculated depending on the destination. We will notify you of the shipping charges before shipping. No shipping to P.O. Boxes. If you would like USPS shipping, please email us the details.