3U Panel for Elecraft KPA500
- Machined 3U - ¼” thick Aluminum Rack Mount Front Panel with handles
- Replacement left side panel for the KPA500
- Two side brackets securely fasten equipment to the front panel
- Stainless steel hardware for installation to the panel included
- Elecraft KPA500 not included
PRODUCT INFO
The rack mount for the KPA500 panel requires that the left side panel of the KPA500 be replaced. The new left side panel has captive nuts press fitted in the sheet metal. Replacing the side panel should be done with extreme care as incorrect re-assembly may cause damage to the unit.
Once the side panel is replaced, the panel mount side brackets are installed to the KPA500 using the pan head screws. Then the unit is mounted to the machined front panel with the screws provided.
We recommend a Phillips #2 screwdriver 350mm long to facilitate mounting the screws to the front panel. Short length screwdrivers may cause cross threading of the threads in the panel if not done correctly and cause damage.
RETURN & REFUND POLICY
Returns must be authorized with a RMA (Return Merchandise Authorization) number. Please contact us before you send the item back. Shipping charges are the customer's responsibility. Item must be clean and unused. Restocking fees may apply.
SHIPPING INFO
Shipping is via UPS Ground and charges will be calculated depending on the destination. We will notify you of the shipping charges before shipping. No shipping to P.O. Boxes. If you would like USPS shipping, please email us the details.